This process applies for byrna LE, SD, HD
Please follow instructions: do not remove any other screw not mentioned in this page, those launchers are difficult to reassemble, save the headache!. We are not responsible for any damage on the launcher, please take your time, carefully remove and reinstall all the pieces.
To install this adapter you must install the 12 gram Co2 extender adapter first, otherwise there is no way to install this adapter. Parts and Tools need: 1.5mm Allen hex key, Gorilla construction adhesive (clear) sold in local stores like Home Depot or Lowe’s. Note: this adapter can be installed with only the small screw…
Compensator Housing adapter installation The installation of this adapter is very simple, there is only one screw holding it, please take your time and be patience, do not tight the screw until you have well positioned this adapter. To install this adapter the 12 gram Co2 extender adapter is required. 1- Install the adapter but…
Stainless Steel Pocket Utility Knife Guide Instructions Slide Fix, Blade Replacement. 1. To replace the blades Push the slide all the way in front, then insert the small threaded tool into the hole same as I did in the image. 2. Once the tool inserted Push again the slide all the way in front. 3….
No products in the cart.
